Weld inspection
Visual inspection of welds before, during and after welding, including dimensional checks and assessment against, for example, ISO 5817 or the project standard.
Request an inspection
ISO 9712 · Visual Testing Level 2
Flexible deployment. Sharp on quality.
Need a certified VT Level 2 inspector for your project, production or audit? Sombroek W.E. carries out visual inspections according to ISO 9712, from weld to report. Flexible deployment, without long-term commitments.
Visual testing (VT)
Visual Testing is the basis of every weld inspection. A VT Level 2 inspector assesses welds and structures for visible imperfections, such as cracks, porosity, undercut and dimensional deviations, and checks them against the applicable acceptance criteria.
Detecting deviations early prevents rework, delays and safety risks. Sombroek W.E. supports you with a flexibly deployable inspector, per project or on an ongoing basis.
What we do
An inspector who thinks along, works accurately and reports clearly.
Visual inspection of welds before, during and after welding, including dimensional checks and assessment against, for example, ISO 5817 or the project standard.
Request an inspectionInspection of steel structures, piping and components, in the workshop or on site.
Request an inspectionA clear inspection report with findings, photos and conclusion, ready for your file or client.
Discuss reportingSupport for your quality department during busy periods, audits or projects.
View QA/QCLevel 2 or Level 3?
ISO 9712 is the international standard for the certification of NDT personnel. The level determines which tasks an inspector may perform.
Not sure what you need? Tell us your question and we will advise the right level.
Carrying out visual inspections according to procedures, assessing results against the acceptance criteria and reporting.
Drawing up and reviewing procedures, supervising inspectors and supporting audits.
View VT Level 3How it works
Tell us about the project, which standard applies and when you need us.
We agree the scope, acceptance criteria and schedule. You receive a quotation in advance.
We carry out the assignment at your location, in the workshop or on site.
You receive a clear report with findings and conclusion, ready for your file.

Your point of contact
At Sombroek W.E. you work directly with Marnix Sombroek: IWT, IWI-C and certified to ISO 9712 VT Level 3. He knows the practice of the workshop as well as the requirements of standards and clients.
No intermediaries or queues: short lines, honest advice and fast handling.
Experiences with Sombroek W.E.
Read the Google reviews from welders and companies who work with us.
Frequently asked questions
Is your question not listed? Send us a message and we will think along with you.
Ask your questionA Level 2 inspector carries out visual inspections according to written procedures, assesses the results against the acceptance criteria and records them in a report.
That depends on your project. Often it is ISO 5817 for the quality level of welds and ISO 17637 for carrying out the visual testing. We always follow your client’s specification.
Often, yes. Send us your schedule and we will let you know within 24 hours when we are available.
At your location: in the workshop or on site, throughout the Netherlands.
That depends on the scope and duration. You receive a clear quotation in advance per day or per project.
Tell us briefly about the project, which standard applies and when you need us. You can attach drawings or specifications.
You will receive a reply with availability and price within 24 hours. Prefer direct contact? Call or WhatsApp +31 6 186 357 26.
We use necessary cookies to make the website work. With your consent, we also measure how the website is used (Google Analytics) and how our ads perform (Google Ads and LinkedIn). You can change your choice at any time via ‘Cookie settings’ at the bottom of the page. Privacy policy